Schematics Checklist

Document Category Item
Schematics SATA Check that SATA signals are connected to hardware capable Serdes port
Schematics SATA Check that there is a 10nF serial capacitor on each TX and RX SATA signal
Schematics SATA Check that HDD SATA are connected from fastest to slowest
Schematics SATA SATA Power P11 signal is grounded
Schematics SATA SATA Controller is set in AHCI mode
  • Bookmark at
  • Bookmark "Schematics Checklist" at del.icio.us
  • Bookmark "Schematics Checklist" at Digg
  • Bookmark "Schematics Checklist" at blogmarks
  • Bookmark "Schematics Checklist" at Google
  • Bookmark "Schematics Checklist" at Facebook
  • Bookmark "Schematics Checklist" at Twitter