Testing

Document Category Item
Functional LAN System works with : 1Gbit Full & Half Duplex, 100 Mbit Full & Half Duplex, 10 Mbit Full & Half Duplex
Functional LAN System can support 1000 Wake On Lan
Functional LAN Check LAN led color in 10M, 100M and Gigabit
Functional LAN RX and TX raw performance in Gigabit (iperf)
Functional LAN MAC address can be programmed
Functional LAN Link can be established in 10M/100M/1000M in half and full duplex in Uboot and OS
Functional LAN Link can be established with different cable lengths (10m, 100m and 110m)
Functional LAN LAN works with cross and straight cables
Functional LAN Brightness of LED (activity / link speed) is the same
Functional LAN Link activity led color is correct
Functional LAN Activity led blinks on network activity
Functional LAN LAN stress in 100M during 24 hours
Functional LAN LAN stress in 1000M during 24 hours
Functional LAN LAN teaming is functional
Functional LAN LAN Jumbo frames is functional
Functional LAN LAN1 is on first CPU controller
Functional LAN LAN1 MDIO address is 0, LAN2 MDIO address is 1
Hardware LAN RGMII Clock check
Hardware LAN MDIO Clock and data check
Hardware LAN 10M Link Pulse 100 Ohm without TPM
Hardware LAN 10M Link Pulse load 1 without TPM
Hardware LAN 10M Link Pulse load 2 without TPM
Hardware LAN 10M Link Pulse 100 ohm with TPM
Hardware LAN 10M Link Pulse Load 1 with TPM
Hardware LAN 10M Link Pulse Load 2 with TPM
Hardware LAN 10M MAU Ext
Hardware LAN 10M MAU Ext Inverted
Hardware LAN 10M MAU Int
Hardware LAN 10M MAU Int Inverted
Hardware LAN 10M TP_IDL 100 ohm without TPM
Hardware LAN 10M TP_ID Load 1 without TPM
Hardware LAN 10M TP_ID Load 2 without TPM
Hardware LAN 10M TP_IDL 100 ohm with TPM
Hardware LAN 10M TP_ID Load 1 with TPM
Hardware LAN 10M TP_ID Load 2 with TPM
Hardware LAN 10M Differential Voltage
Hardware LAN 10M Harmonic
Hardware LAN 100M AOI Template
Hardware LAN 100M Output Voltage (+Vout)
Hardware LAN 100M Output Voltage (-Vout)
Hardware LAN 100M Amplitude Symmetry
Hardware LAN 100M Rise Time(+ve)
Hardware LAN 100M Rise Time(-ve)
Hardware LAN 100M Fall Time(+ve)
Hardware LAN 100M Fall Time(-ve)
Hardware LAN 100M Rise/Fall Symmetry(+ve)
Hardware LAN 100M Rise/Fall Symmetry(-ve)
Hardware LAN 100M Overshoot(+ve)
Hardware LAN 100M Overshoot(-ve)
Hardware LAN 100M Transmit Jitter(+ve)
Hardware LAN 100M Transmit Jitter(-ve)
Hardware LAN 100M Distortion (Duty Cycle)
Hardware LAN 1G Template Test Point A on each of the four signal pairs
Hardware LAN 1G Template Test Point B on each of the four signal pairs
Hardware LAN 1G Template Test Point C on each of the four signal pairs
Hardware LAN 1G Template Test Point D on each of the four signal pairs
Hardware LAN 1G Template Test Point F on each of the four signal pairs
Hardware LAN 1G Template Test Point H on each of the four signal pairs
Hardware LAN 1G Peak Volt Point A on each of the four signal pairs
Hardware LAN 1G Peak Volt Point B on each of the four signal pairs
Hardware LAN 1G %Diff A and B on each of the four signal pairs
Hardware LAN 1G Peak Volt % Diff C on each of the four signal pairs
Hardware LAN 1G Peak Volt % Diff D on each of the four signal pairs
Hardware LAN 1G Droop Point G on each of the four signal pairs
Hardware LAN 1G Droop Point J on each of the four signal pairs
Hardware LAN 1G Transmitter Distortion on each of the four signal pairs

Testing tools

Linux

  • Set LAN Speed/Duplex : ethtool
  • LAN Performance test : iperf, ttcp
  • Set Ethernet Controller in test mode : sendpkt
  • Bookmark at
  • Bookmark "Testing" at del.icio.us
  • Bookmark "Testing" at Digg
  • Bookmark "Testing" at blogmarks
  • Bookmark "Testing" at Google
  • Bookmark "Testing" at Facebook
  • Bookmark "Testing" at Twitter